Universal 3-Position Foot Controller (UFC-3)
Questions regarding the UFC-3 footswitch.
We do not, but the UFC-3 will work with any CAT5 or CAT6 cable with an RJ45 jack. You can find them easily online or at your local electronics store. No...
Wed, 20 Nov, 2024 at 9:42 AM
If you're having issues with your UFC-3 and it's not working as it should, then it is very likely it is either one of the following: 1. The Cabl...
Tue, 16 Jul, 2024 at 11:35 AM
The UFC-3 is compatible with the Mach 3, as well as the OverDrive 202. The UFC-3 will also work with the following discontinued models: Aviator (Gen...
Wed, 11 Oct, 2023 at 3:43 PM
Some folks just need a footswitch that only does one thing. We understand! If you're looking to build your own footswitch for your amp, follow the RJ-45...
Tue, 1 Oct, 2024 at 2:18 PM
Yes! All Quilter amps that are footswitch-compatible are designed work with all Quilter footswitches, past and present. That means you can run your Mach 3 w...
Thu, 18 Jul, 2024 at 3:10 PM
That will indeed work. Just connect one Quilter amp (that is compatible with the UFC-3) into each RJ-45 jack of the UFC-3 and you'll be set. Just no...
Mon, 5 Aug, 2024 at 3:32 PM
While the Overdrive 202 is Quilter footswitch compatible, only three of the effects on our footswitches will work on this amp, which are the following: ...
Thu, 10 Oct, 2024 at 10:48 AM